Korg PA1000 User Manual page 470

Hide thumbs Also See for PA1000:

Table of Contents

Customizing and editing the Sounds

While in any of the

mand from the

While in this window, you can press the

function to find files in the various media.

Browse through the files, then select the one to load, and touch the

Imported Sounds, multisamples and sample are automatically stored in the

internal memory, and will not be lost when turning the instrument off.

When importing a multisample, take note of its name; you will need it in

Sound mode, when assigning the multisample to a new Sound.

Importing PCG files

When importing a PCG file, you can choose between a single Program or a

Sound); touch the Program number and dial in the corresponding number.

Choose a target Sound location where to load the imported Program.

the Sound Bank name to choose a target bank where to load the imported

Due to the differences between Pa1000 and the older KORG instruments,

some differences may arise during conversion. When reading a PCG file,

Pa1000 tries to use exactly the same multisamples as in Triton. If this is not

possible, it looks for a similar multisample. If this is also not possible, an

<empty> multisample will be selected. Go to the Sound mode, and select a

multisample suitable for the imported Program.

Not all Triton's PCG data are imported. Insert FX, EQ, Arpeggio, Combi,

Global and Drum Kit data are not loaded.

menu, to open the

to choose a single Program (corresponding to a Pa-Series

to import all the Programs from the selected bank. Touch

pages, choose the

button, and use the Search