Table of Contents
Advertisement
Controlling the Voice/Guitar Processor via MIDI
You can control the Voice/Guitar Processor via MIDI, for example by con-
necting a MIDI pedalboard to the
Choosing a MIDI channel
The controlling device must transmit on the MIDI channel selected as the
Voice/Guitar Processor's MIDI channel.
1
Go to the
Global > Midi
2
Use the
Voice/Guitar Processor > Channel
MIDI channels.
3
Use the
Voice Processor > Octave Transpose In
chords or notes received.
4
Use the
Voice Processor > In Note Range High/Low
range or notes to be sent to the Harmony section of the Voice Processor.
Using the effects and voice harmonization |527
MIDI IN
>
Midi In Control
page.
port of Pa1000.
parameters to select one of the
parameter to transpose the
parameters to set a
Advertisement
Table of Contents
