Table of Contents
Advertisement
410|
Customizing and editing the Sounds
The diagram shows how the Pitch Slope and pitch are related:
Pitch
2oct
1oct
1oct
Controlling the pitch with physical controllers
▪
Use the
Pitch Mode
Pitch Mode
Normal
Fixed Scale
Highest Pitch Bend
only
Lowest Pitch Bend
only
▪
Use the
Ribbon to Pitch
semitones) controlled by the Ribbon Controller message (CC#16). The Ribbon
Controller message can be received from MIDI or contained in a Standard
MIDI File.
▪
Use the
JS (+X)
joystick is moved all the way to the right (-60...+12 semitones). A setting of 12
produces 1 octave of change.
For example if you set this to +12 and move the joystick all the way to the
right, the pitch will rise one octave above the original pitch.
▪
Use the
JS (-X)
joystick is moved all the way to the left (-60...+12 semitones). A setting of 12
produces 1 octave of change.
For example, if you set this to -60 and move the joystick all the way to the
left, the pitch will fall five octaves below the original pitch. This can be used
to simulate the downward swoops that a guitarist produces using the trem-
olo arm.
+2
+1
0
–1
C4 C5
Key
pop-up menu to set the Pitch Bend direction.
Meaning
Linear bending.
When this parameter is turned on on an oscillator, Pitch Bend and
Sub Scale have no effect on its tuning. The relevant parameters are
greyed out and non-selectable.
On this oscillator, Pitch Bend is only activated on the highest note
currently playing on the keyboard.
On this oscillator, Pitch Bend is only activated on the lowest note cur-
rently playing on the keyboard.
parameter to set the Pitch Bend range (-12...0...+12
parameter to specify how the pitch will change when the
parameter to specify how the pitch will change when the
Advertisement
Table of Contents
