Table of Contents
Advertisement
342|
Customizing, recording and editing the Songs
3
Choose the Step
Backing Sequence
Event list
Step controls
Recording
While in edit, the events at the current position are shown by the right-point-
ing arrowheads ( ) on the left of the event.
1
Use the
Measure
ing the
VALUE
As an alternatively, you can move the locator by using the
the lower area of the display.
Step control
Event
Step
Measure
2
Select a
parameter type
delete at the current position.
3
Use the
VALUE
the
Del
button next to the event. When editing a parameter without the ar-
rowhead ( ) next to it, a new event is inserted at the current position.
4
When finished editing, touch the
Sequence
recording mode.
Backing Sequence
page.
parameter to go to the desired position in the Song, by us-
control.
Meaning
Use these buttons to move to the previous or next recorded event.
Use these buttons to go to the previous or next step (1/8, or 192
ticks). If an event is located before the previous or next step, the
locator stops on that event. For example, if you are positioned on
M001.01.000, and no event exists before M001.01.192, the > button
moves to the M001.01.192 location. If an event exists on M001.01.010,
the > button stops to the M001.01.010 location.
Use these buttons to move to the previous or following measure.
(Style, Keyboard Set, Tempo...) to insert, edit or
control to modify the selected event. Delete it by touching
option and touch
Position indicator
Done
button to exit from the
OK
to access the
Step
step controls
Step Backing
in
Advertisement
Table of Contents
