Setting the general harmony parameters
The top area of the page contains general parameters.
Choosing the Harmony set
▪
Use the
Set
pop-up menu to choose settings for the Harmony block.
Choosing the harmony type
▪
Use the
Type
Harmony type
Chord
Scale
Shift
Notes
Choosing the source of chords or notes
▪
Use the
Style Play Control
notes controlling harmony in the Style Play mode.
Control source
(Style Play)
Chord Scan
Lower
Upper
Full
pop-up menu to choose the type of harmonization.
Meaning
Chords are to be played on the keyboard, received from a MIDI Song
or via MIDI. When this type is selected, you can choose the source of
the controlling chords (as explained below).
Harmony notes are adapted to the selected scale. When this type is
selected, you can choose the Key/Scale (as explained below).
Harmony notes are exactly the indicated interval above or under the
Lead voice.
Harmony voices play the notes played on the keyboard, received
from a MIDI Song or via MIDI. When this type is selected, you can
choose the source of the controlling notes (as explained below).
pop-up menu to choose a source for chords or
Meaning
Play chords or notes in the area chosen with the CHORD SCAN but-
tons in the control panel.
Play chords or notes in the Lower area (under the split point).
Play chords or notes in the Upper area (above the split point).
Play chords or notes over the full extension of the keyboard.
Editing the Voice/Guitar Presets |533