Cpu-03/Cpu-04 Module Connections - YASKAWA MP2200 User Manual

3.2 Connecting Basic Units

3.2.3 CPU-03/CPU-04 Module Connections

3.2.3 CPU-03/CPU-04 Module Connections
( 1 ) CARD Module Connector Details (except CPU-04)
Refer to 3.2.2 ( 1 ) CARD Module Connector Details .
( 2 ) Ethernet Connector Details
Connects to a personal computer or HMI device by Ethernet (100Base-TX /10Base-T).
[ a ] Ethernet Connector Specification and Pin Arrangement/ Indicator Lamp
The following table provides the Ethernet connector specifications.
Name
Ethernet
The following table provides Ethernet connector pin arrangement/ indicator lamp details.
Ethernet
LINK
100M
[ b ] Ethernet Cable
For the Ethernet cable, use a twisted pair cable with RJ-45 connector.
Ethernet Type
10Base-T
100Base-TX
3-14
Connector Number
Name of Pins
8
Ethernet
Pin Number Signal Name
1 TXD+
2 TXD-
3 RXD+
–
4
–
5
6 RXD-
–
7
–
8
Indicator Name Indicator Color
Yellow
LINK
Green
100M
Category
Category 3 or more
Category 5 or more
Connector Model
Module Side Cable Side
RJ-45 CAT5 Socket RJ-45 CAT5 Plug
Description
Transmitted data + side
Transmitted data – side
Received data + side
–
–
Received data – side
–
–
Description
Lit: Connect
Unlit: Unconnected
Lit: Connected at 100Mbps, or automatically
negotiating
Unlit: Connected at 10Mbps
• When connecting to remote device through a hub: Straight cable
• When connecting to remote device without using a hub: Cross cable
Manufacturer
Pulse Engineering
Remarks