YASKAWA MP2200 User Manual page 328

[ a ] How to Disable a User Program
• Drawing or Function
In the ladder subwindow of the MPE720 online mode, right-click the corresponding drawing and function and
select Enable/Disable in the pop-up menu.
• Sequence Program (Supported by the CPU-03 and CPU-04)
In the Module Configuration Window of the MPE720 online mode, open the M-EXECUTOR module detailed
definition window and select D check box of the sequence program definition to disable the definition and save the
change.
 Caution
When a drawing, function, or sequence program (supported by the CPU-03/CPU-04) is disabled, the equipment may become
unstable, causing personal injury or damage to the equipment. If carrying out an investigation, be aware of the behavior of the
equipment when a drawing, function, or sequence program is disabled.
After the investigation, make sure to enable the drawing, function, or sequence program (supported by the CPU-03/CPU-04)
again.
8.2 Troubleshooting
8.2.4 Troubleshooting System Errors
8
8-13