( 5 ) Option (PARAM03)
A unique value is output for each communication device.
Not used for the MELSEC protocol.
( 6 ) Function Code (PARAM04)
Received function code is output.
The following table lists the function codes available when using the MELSEC protocol.
Function Code
01H/02H
03H/04H/09H/0AH
05H/0FH
06H/0BH/10H
08H
0EH
31H
32H
33H
Note: 1. B: Bit type, W: Integer type
2. AnCPU dedicated commands are not supported. Commands for extended file register are not sup-
ported.
( 7 ) Data Address (PARAM05)
A data address requested from the transmission side is output.
( 8 ) Data Size (PARAM06)
The read/write data size (number of bits or words) requested from the transmission side is output.
( 9 ) Remote CPU Number (PARAM07)
Refer to D.2.4 ( 9 ) Remote CPU Number (PARAM07).
Table D.24 Function Code List (MELSEC)
MELSEC ACPU
Target Data
Common Command
Type
00H
B
01H
W
02H
B
03H
W
–
16H
05H
B
60H
W
61H
W
62H
W
Appendix D MSG-SND/ MSG-RCV Functions (Ethernet)
D.2 Message Receive Function (MSG-RCV)
Function
Reads bit device in units
Reads word device in units
Writes to bit device in units
Writes to word device in units
Loopback test
Specifies a device number for each word device at random
and sets/resets each word device
Writes to the fixed buffer in words
Reads from the random access buffer in words (unable to
receive for MP200 series)
Writes to the random access buffer in words
A
A-67