YASKAWA MP2200 User Manual page 80


Automatically Reception Dialog Box for Message Communication
The automatic receive function can be enabled only for connections where the connection number = 1.
The automatic receive function enables the system to automatically run a function equivalent to the MSG-RCV func-
tion.
The following table explains each setting item.
Item Setting Range
Automatically Re-
ception Enable/Dis- Enable/Disable
able
The setting items below can only be set when the Automatically Reception is set to "Enable."
Transmission Buffer Cannot be set
Channel (fixed to 1)
Readout of Input IW0000 to
Relay IWFFFF
Readout of Input
IW0000 to
Register IWFFFF
Readout/Write-in of MW00000 to
Coil MW65534
Readout/Write-in of MW00000 to
Hold Register MW65534
Write-in Width of
MW00000 to
Coil/Hold Register
MW65534
(LO)
Write-in Width of
MW00000 to
Coil/Hold Register
MW65534
(HI)
Details
Select whether to enable automatic reception.
Note: When the local port number is not yet set, it becomes invalid
regardless of the enable/disable selection.
The communication buffer channel is usually used for data
exchanged between the MSG-SND/MSG-RCV function and
218IFA.
The communication buffer channel is associated with the connec-
tion according to the input item "CH-NO" for the MSG-SND/
MSG-RCV function and node connection number (PARAM02)
setting for the parameter list (PARAM).
When automatic reception is running, the function equivalent to
the MSG-RCV function is realized by using the communication
buffer channel number "1."
Set a start register of the input relay used for the automatic recep-
tion.
Set a start register of the input register used for the automatic
reception.
Set a start read/write register of the coil used for the automatic
reception.
Set a start read/write register of the holding register used for auto-
matic reception.
Set a write range (LO) of the coil/holding registers used for auto-
matic reception.
Set a write range (HI) of the coil/holding registers used for the
automatic reception.
2.5 CPU-03 Module
2.5.6 218IFA Module (Ethernet)
Default
Enable
1
IW0000
IW0000
MW00000
MW00000
MW00000
MW65534
2
2-49