YASKAWA MP2200 User Manual page 215

5.
Click Yes in the confirmation dialog of the parameter setting.
 Caution
Note that when a parameter with the same connection number is already set and you click Yes in the confirmation dialog of the
parameter setting, the setting will be overwritten by the parameter configured in the Message Communication Easy Setting
Dialog Box.
6.
Check the setting value and click the Setting Button in the Detail Column.
7.
Select the Enable Option on the Automatically Reception Tab Page of the Detail Setting Dialog Box
and then click the OK Button.
Note: For more information on Slave I/F Register Settings and Automatic input precessing delay time,
refer to 2.5.6 ( 4 ) [ b ]
Now, the automatic receive function is set up when the CPU-03/CPU-04 acts as a slave.
 Caution
When any transmission or connection parameter is changed, the change will be reflected after it has been saved in flash memory
and the power is turned ON again.
6.2.1 When the CPU-03/CPU-04 Acts as Slave (automatic receive function is used)

Automatically Reception Dialog Box for Message Communication.
6.2 Communication with Other MP Series
6
6-7