Answering Incoming Calls And Ending A Conference; Setting The Answering Mode; Ending A Conference; Setting Conference Parameters - Huawei 9000 VCT V100R011 Administrator's Manual

HUAWEI 9000 HD Video Terminal
Administrator Guide
Follow-up Procedure
After a conference is scheduled successfully, you can find the conference by selecting Schedule
Conference and then Scheduled Conferences.

5.2 Answering Incoming Calls and Ending a Conference

The mode for answering incoming calls can be set.

5.2.1 Setting the Answering Mode

Two answering modes are available on the terminal: answering incoming calls manually and
answering incoming calls automatically.
Procedure
Step 1 Select Settings > General.
If the automatic answering function is enabled, the terminal answers incoming calls
automatically.
If the automatic answering function is disabled, when there is an incoming call, a message
appears on the screen indicating that a remote terminal is calling. Use the remote control to
answer or reject the call.
The automatic answering function is disabled by default.
Step 2 Save the settings.
----End

5.2.2 Ending a Conference

To end or exit from a conference, end the relevant call.
Procedure
Step 1 Press
Step 2 When a message is displayed, confirm that you want to end the call or exit from the conference.
----End

5.3 Setting Conference Parameters

The factory settings and default settings of the conference parameters can help the conduct of
conferences. The parameters can also be set based on actual requirements.
Context
The settings of the conference parameters are optional. They are applied in the following cases:
l
Issue 09 (2012-09-03)
on the remote control.
Two-party conferences initiated by the local site by making calls
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Initiating a Conference
85