Selecting And Controlling A Camera; Selecting A Camera; Adjusting The Focal Length Of The Camera - Huawei 9000 VCT V100R011 Administrator's Manual

HUAWEI 9000 HD Video Terminal
Administrator Guide
Parameter
Enable SD input
interface
Step 2 Save the settings.
----End

3.3 Selecting and Controlling a Camera

If you have connected multiple video devices to the video input interfaces, you must select local
and remote video sources from the connected devices.
Select local and remote video sources, and control the local and relevant remote cameras to
obtain the desired view.

3.3.1 Selecting a Camera

To control a camera, first select the camera.
Context
If the terminal is not in a conference, only the local camera can be controlled. If the terminal is
in a conference, both the local and remote cameras can be controlled.
Procedure
Step 1 Press
Step 2 Choose the camera to be controlled between the local and remote cameras.
----End

3.3.2 Adjusting the Focal Length of the Camera

You can change the magnification of distant objects by adjusting the focal length of the
corresponding camera.
Procedure
Step 1 Press
Step 2 Adjust the focal length as required.
Issue 09 (2012-09-03)
Description
This parameter is available on only the HUAWEI VP9035A. After this
function is enabled, the SD IN 1 interface of the HUAWEI VP9035A is
enabled and the HD IN 1 interface cannot be used.
Signals of both the CVBS and S-Video types can be input to the SD IN
1 interface of the HUAWEI VP9035A.
, and then select a camera.
TIP
The text on the upper left corner indicates the camera that is currently being controlled (local or remote).
, and then select Adjust Focus.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Camera and Display
49