Moving A Camera To A Preset; Deleting All Camera Presets; Connecting A Display - Huawei 9000 VCT V100R011 Administrator's Manual

HUAWEI 9000 HD Video Terminal
Administrator Guide

3.4.2 Moving a Camera to a Preset

After you move a camera to a preset, the camera automatically adjusts its zooming level and
direction to the preset values.
Prerequisites
Camera presets are available on the terminal.
Procedure
Step 1 Press
Step 2 Scroll to a camera preset by pressing arrow keys, and then press
corresponding preset.
----End

3.4.3 Deleting All Camera Presets

If the camera presets saved on the terminal are no longer required, they can be deleted.
Prerequisites
Camera presets are available on the terminal.
Context
All the camera presets saved on the terminal can be deleted at the same time; however, the presets
cannot be deleted one at a time.
Procedure
Step 1 Press
Step 2 Confirm that you want to delete all camera presets as prompted.
----End

3.5 Connecting a Display

When connecting displays to the terminal, choose cables based on the relevant interfaces.
Table 3-9
contents vary with the interfaces to which the displays are connected. In the following table,
indicates local video;
remote presentation.
Issue 09 (2012-09-03)
, and then select Switch Camera Preset.
, and then select Delete All Camera Presets.
describes the specifications of the video output interfaces of the terminal. The display
indicates local presentation;
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Camera and Display
to move the camera to the
indicates remote video; indicates
52