Huawei 9000 VCT V100R011 Administrator's Manual page 21

HUAWEI 9000 HD Video Terminal
Administrator Guide
Table 1-4
specific interfaces by finding the corresponding white labels on the panels illustrated in
1-7
Table 1-4 Interfaces on the rear panel
Label
MIC1
MIC2
HD OUT 1
HD OUT 2
HD OUT 4
HD OUT 5
HD SDI OUT
HD OUT 3
AUDIO OUT
AUX
AUDIO OUT
MAIN
AUDIO IN
Issue 09 (2012-09-03)
outlines the interfaces, from left to right, on the rear panel of each model. Identify
to Figure 1-13.
Interface
Microphone
interfaces
HD video
output
interfaces 1, 2,
4, and 5
HD SDI video
output
interface
HD video
output
interface 3
Auxiliary
audio output
interface
Main audio
output
interface
Line audio
input interface
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
XLR-3 connector (cannon connector), balanced
transmission, and 48 V/10 mA phantom feed
The ViewPoint 9030 has only one MIC interface.
NOTE
For example, for a microphone to function correctly it may
require an external power supply to be connected to it. If both
the terminal and the microphone support the 48 V phantom
voltage, however, the microphone can be connected to the
terminal using the audio interface and no external power supply
is required; the terminal supplies power for the microphone.
The HD OUT 1 and HD OUT 2 interfaces are HD DVI-
I interfaces that support both digital and analog signals.
The HD OUT 4 and HD OUT 5 interfaces are DVI-D
interfaces.
NOTE
Only the ViewPoint 9039 provides the HD OUT 4 and HD OUT
5 interfaces.
The HD SDI OUT interface is an SMB interface that
supports HD-SDI signals and a 1.485 Gbit/s bandwidth.
NOTE
Only the ViewPoint 9039S and the HUAWEI VP9039A provide
HD SDI OUT interfaces.
The HD OUT 3 interface is a DVI-I interface.
NOTE
Only the ViewPoint 9039 and the ViewPoint 9036 provide HD
OUT 3 interfaces.
RCA interface and unbalanced transmission
RCA interface and unbalanced transmission
L indicates the left audio channel and R indicates the right
audio channel.
RCA interface and unbalanced transmission
This interface is used to connect to the tuning console.
1 Installation and Preparation
Figure
9