Huawei 9000 VCT V100R011 Administrator's Manual page 58

HUAWEI 9000 HD Video Terminal
Administrator Guide
Table 3-3 Specifications of video input interfaces (ViewPoint 9039S and HUAWEI VP9039A)
Video Input
Interface
HD IN 1
HD IN 2
SD IN 1
HD SDI IN
Table 3-4 Specifications of video input interfaces (HUAWEI VP9036S)
Video Input
Interface
HD IN 1
HD IN 2
SD IN 1
If a Huawei HD camera is used, note the following:
l
l
Each input interface to be used for transmitting a video or a presentation can be specified on the
user interface. For details, see section
Issue 09 (2012-09-03)
Type
DVI-I
DVI-I
DVI-I
SMB
Type
DVI-I
DVI-I
DVI-I
NOTE
l Both the HD IN 1 and HD IN 2 interfaces of the ViewPoint 9035 are DVI-I interfaces; a presentation
source cannot be connected to the HD IN 1 interface.
l PTZ is an acronym for Pan, Tilt, and Zoom. A PTZ camera supports panning, tilting, and zooming
control.
l DVI/SXGA/YPrPb indicates that an interface supports all the three formats simultaneously. Only one
format, however, can be used at a time.
If the DVI and SDI interfaces of a camera are used to output 720p 60 Hz video
simultaneously, set the video output type to DVI.
Otherwise, if the type of the video input interface of the terminal is set to DVI, set the video
output type of the camera to DVI. If the type of the video input interface of the terminal is
set to SDI, set the video output type of the camera to SDI.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Receivable Input Format Control
DVI, SXGA, and YPrPb
DVI, SXGA, and YPrPb
A DVI-HDMI/VGA/S-
Video/CVBS conversion
cable can be connected to
this interface so that CVBS
or S-Video signals can be
input.
HD-SDI
Receivable Input Format Control
DVI, SXGA, and YPrPb
DVI, SXGA, and YPrPb
A DVI-HDMI/VGA/S-
Video/CVBS conversion
cable can be connected to
this interface so that CVBS
or S-Video signals can be
input.
7.7 Selecting a Video Source
3 Camera and Display
Camera PTZ
Camera PTZ
Camera PTZ
Camera PTZ
Camera PTZ
Camera PTZ
Camera PTZ
.
46