Huawei 9000 VCT V100R011 Administrator's Manual page 106

HUAWEI 9000 HD Video Terminal
Administrator Guide
Figure 5-1 Procedure for joining an authentication conference
l
l
l
l
To join an authentication conference, perform the following operations:
Procedure
Step 1 Check the necessary resource preparations using the following methods:
l
Issue 09 (2012-09-03)
Setting the number of anonymous sites: Set the number of anonymous sites when initiating
a conference. Set numbers of anonymous sites of all types as listed in
example, Anonymous H.323 sites.
Setting the authentication password: Set the Conference control password when initiating
a conference. This password can serve as the authentication password, which an anonymous
site needs to enter to join an authentication conference. If the Conference control
password is left blank, anonymous sites can join the conference without entering any
password.
Obtaining the access number of the authentication conference: After the authentication
conference is initiated, a terminal can obtain the access number from the message which
is displayed when the terminal requests chair control rights successfully; the chair site can
also obtain the access number by choosing Diagnostics > Status > Conference.
Anonymous sites can obtain the access number and the authentication password from the
chair site using other methods.
Joining the authentication conference by anonymous sites: Anonymous PSTN sites can
join the conference by calling the access number of the audio authentication conference
and anonymous IP sites can join the conference by calling the access number of the video
authentication conference.
From the chair site: Check that the anonymous site resources are available in the conference
to be called, and the access number of the video or audio authentication conference and the
authentication password have been obtained.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Initiating a Conference
Table 5-1, for
94