Huawei 9000 VCT V100R011 Administrator's Manual page 27

HUAWEI 9000 HD Video Terminal
Administrator Guide
To power off the ViewPoint 9039, perform either of the following operations:
l
l
Table 1-5
ViewPoint 9039.
Table 1-5 Description of the power indicator
Indicator Status
On
Off
Table 1-6 Description of the status indicator
Indicator Status
The blue indicator turns on.
The blue indicator blinks on
pressing of the remote control.
The blue indicator blinks.
The red indicator turns on.
The indicators turn off.
ViewPoint 9030
To power on the ViewPoint 9030, perform the following operation:
Press the power switch on the rear panel to the ON position.
To power off the ViewPoint 9030, perform either of the following operations:
l
Issue 09 (2012-09-03)
Press and hold on the remote control for about one second.
Press and hold the power button on the front panel for one second.
and Table 1-6 describe the meanings of the indicators on the front panel of the
Press and hold on the remote control for about one second.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Terminal Status
l The terminal is powered on and working properly.
l The power cable and the terminal are connected
properly. In addition, the external power supply is
connected properly.
l The power cable and the terminal are disconnected.
l The external power supply is cut off.
Terminal Status
l The terminal is working properly.
l The terminal is in sleep mode.
The terminal responds to the remote control properly.
The blue indicator blinks each time one of the remote
control buttons is pressed.
l The terminal is starting.
l The terminal is upgrading.
A fault exists on the terminal. For example, a self-test
error is found on a component; the temperature is too
high; or the software does not work properly.
The terminal is powered off.
1 Installation and Preparation
15