Huawei 9000 VCT V100R011 Administrator's Manual page 40

Hd video terminal
Table of Contents

Advertisement

HUAWEI 9000 HD Video Terminal
Administrator Guide
Procedure
Step 1 Choose Settings > Network > IP, and then set the parameters listed in
Table 2-4 IP parameters
Parameter
Connection type
Local IP address
Subnet mask
Alternate IP address
Alternate subnet mask
Dialing mode
Gateway address
Issue 09 (2012-09-03)
Description
l Static IP: The IP address of the terminal is assigned by the
network administrator. If this mode is selected, you need
to enter the local IP address, subnet mask, and gateway IP
address.
l Dynamic IP: The terminal obtains an IP address
automatically over the Dynamic Host Configuration
Protocol (DHCP) when a DHCP server is available on the
network.
l PPPoE: The terminal accesses the broadband network in
dial-up mode, such as the Asymmetric Digital Subscriber
Line (ADSL). If the Point-to-Point Protocol over Ethernet
(PPPoE) mode is selected, you need to set the user name
and the password.
This specifies the IP address and the subnet mask of the local
terminal.
The main IP address and the alternate IP address need to be in
different network segments. The alternate IP address and the
IP address of the gatekeeper (GK) need to be in different
network segments.
The dial-up process complies with PPPoE. Enter the user name
and password provided by your broadband access service
provider in User name and Password. Then select a dial-up
mode.
l Auto: The terminal sets up a dial-up connection over the
IP network after startup. If the service is charged, charging
starts after the dial-up connection is established.
l Manual: Use the dial-up program to access the network.
From the home screen, select Utilities to display the
Utilities screen. Then choose PPPoE Dialing > Connect.
This specifies the gateway IP address that corresponds to the
IP address of the local terminal. You must set this gateway IP
address if the local terminal needs to communicate with
another terminal that is located in a network that is different
from the network where the local terminal resides and if the
connection type is set to Static IP.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Network
Table
2-4.
28

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents