Answering An Incoming Call And Exiting A Conference; Setting Conference Parameters - Huawei V100R001 User Manual

HUAWEI TE30 Videoconferencing Endpoint
User Guide

6.1 Answering an Incoming Call and Exiting a Conference

You can specify how your TE30 handles incoming calls. You can also exit a conference
anytime.
Answering an Incoming Call
Depending on your configuration, your TE30 answers the call automatically or prompts you
to answer the call manually.


Exiting a Conference
When you are in a conference, you can disconnect the local site from the conference to exit it.
Step 1 Press
Step 2 When prompted, select OK.
----End

6.2 Setting Conference Parameters

Your TE30 is ready for videoconferencing with its default conference settings, but you can
customize the conference settings based on the site requirements.
Background
General conference parameters apply to the following conferences:



To initiate an H.239 dual stream conference, set the video and H.239 parameters. To initiate a
single stream conference, just set the video parameters. For details about the H.239 dual
stream mode, see
Configuring General Conference Parameters
Step 1 Choose Advanced Settings > Settings > Conference > Normal. Set the general conference
parameters by referring to
Issue 01 (2013-03-27)
If you set Answer Mode to Answer call automatically and the TE30 is not in a
conference, the TE30 answers the call automatically.
If you set Answer Mode to Manual, your TE30 prompts you to handle the call. You can
then use the remote control to answer or reject the call.
To set the answer mode, choose Advanced Settings > Settings > Conference > Normal.
on the remote control.
Point-to-point conferences initiated by your site
Multipoint conferences initiated by your site
Conferences that your site joins by answering the call from a remote site
6.4 Sharing a
Table
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Presentation.
6-1.
6 Conference
40