Answering Incoming Calls And Ending A Conference; Setting The Answering Mode; Ending A Conference; Setting Conference Parameters - Huawei VP9050 User Manual

HUAWEI VP9050 Executive Video Terminal
User Guide

----End
After a conference is scheduled successfully, you can find the conference by selecting
Schedule Conference and then Scheduled Conferences.

6.2 Answering Incoming Calls and Ending a Conference

The mode for answering incoming calls can be set.

6.2.1 Setting the Answering Mode

Two answering modes are available on the terminal: answering incoming calls manually and
answering incoming calls automatically.
To set the answering mode, do the following:
Step 1 Select Settings > General.
If the automatic answering function is enabled, the terminal answers incoming calls
automatically.
If the automatic answering function is disabled, when there is an incoming call, a message
appears on the screen indicating that a remote terminal is calling. Use the remote control to
answer or reject the call.
The automatic answering function is disabled by default.
Step 2 Save the settings.
----End

6.2.2 Ending a Conference

To end or exit from a conference, end the relevant call.
To end a conference, do the following:
Step 1 Press
Step 2 When a message is displayed, confirm that you want to end the call or exit from the
conference.
----End

6.3 Setting Conference Parameters

The factory settings and default settings of the conference parameters can help the conduct of
conferences. The parameters can also be set based on actual requirements.
To initiate a dual-stream conference, set the video and H.239 parameters. To initiate a
single-stream conference, only the video parameters need to be set.
Issue 03 (2011-12-10)
Select Create, set site and conference parameters, set Start date, Time format, Start
time, and Conference duration (ranging from 30 min to 360 min), and then select OK.
on the remote control.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
6 Conference Initiation
42