Setting 3G Dial-Up Parameters And Establishing A Dial-Up Connection - Huawei 9000 VCT V100R011 Administrator's Manual

HUAWEI 9000 HD Video Terminal
Administrator Guide
Parameter
Dialing mode
Step 2 Save the settings.
----End
2.7.2 Setting 3G Dial-up Parameters and Establishing a Dial-up
Connection
After a PPP dial-up connection is established, the terminal can obtain the IP address allocated
by the server and can make calls over the 3G network.
Prerequisites
Before connecting to the 3G network, ensure that:
l
l
Procedure
Step 1 Choose Settings > Network > 3G > 3G Dialing, and then set the parameters listed in
2-14.
Table 2-14 3G dial-up parameters
Parameter
Switch
between 3G
networks
USB device
APN
Issue 09 (2012-09-03)
Description
The default value is Manual.
l Auto: If this option is selected, the terminal initiates a PPP dial-
l Manual: If this option is selected, the terminal does not initiate
The terminal is connected with a 3G data card successfully.
The 3G network is enabled. For details, see section
Description
This specifies the 3G network operator.
Click Search to search for the existing 3G network operators.
This specifies the type of the data card. The available options are Wideband
Code Division Multiple Access (WCDMA) and CDMA2000.
This specifies the name of the network access point. If a WCDMA data card
is used, you need to set this parameter.
For details, contact your operator.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
up connection automatically. The billing system starts charging
after the dial-up connection is established successfully. If you
use the monthly fee mode, using the automatic mode for the PPP
dial-up connection is recommended.
the PPP dial-up connection automatically. If you pay the fee
based on connection duration, using the manual mode for the
PPP dial-up connection is recommended.
2.7.1 Setting 3G Parameters.
2 Network
Table
41