Huawei 9000 VCT V100R011 Administrator's Manual page 118

HUAWEI 9000 HD Video Terminal
Administrator Guide
Function Name
Disable Chair Control
Lock conference
Restore Auto
Continuous Presence
6.1 Customizing the Option Bar
You can customize icons on the option bar to facilitate access to the corresponding screens.
6.2 Customizing the Conference Control Screen
You can customize the Conference control screen as required by specifying the conference
control options to be displayed on the screen.
6.3 Viewing Sites
You can view a single site or view multiple sites in turn.
6.4 Broadcasting Sites
All the sites (except for the broadcasting site) are forced to view the broadcasting site.
6.5 Giving the Floor to a Site
The chair site can give the floor to a site and mute all the other sites by performing the Give
Floor operation.
6.6 Locking a Presentation
During a conference, the chair site can lock both the presentation of a single site or the entire
conference.
6.7 Displaying Sites Requesting the Floor
The chair site can use this function to view the sites that are currently requesting the floor.
6.8 Placing a Call
This function is used to place a call to a site that is not present in the conference. The site joins
the conference after answering the call.
6.9 Disconnecting a Site
The chair site can disconnect a participating site from the conference. After the disconnection,
the site exits the conference automatically.
6.10 Deleting a Site
Issue 09 (2012-09-03)
NOTE
When a conference is held with a built-in MCU, Enable Chair Control, Disable Chair Control, Restore
Auto Continuous Presence and Lock conference are available only to the site whose built-in MCU is
being used.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
This function is used to disable chair control in a conference. For
example, if a chair site exists in a conference, the site whose built-
in MCU is being used can use this function to revoke chair control
rights. In addition, the sites in the conference cannot request to
become the chair site afterward.
If the built-in MCU of a terminal is used during a conference and
if you do not want more sites to join the conference, you can
perform the Lock conference operation on the terminal whose
built-in MCU is being used.
After Restore Auto Continuous Presence is performed, the
terminal automatically generates continuous presence in a layout
corresponding to continuous presence and adaptation capabilities
of the built-in MCU and the number of sites in the conference.
6 Conference Control
106