Huawei 9000 VCT V100R011 Administrator's Manual page 38

HUAWEI 9000 HD Video Terminal
Administrator Guide
Parameter
Select number key
function
Step 3 Save the settings.
----End
Follow-up Procedure
To superimpose the site name on the local video, Choose Settings > Display > Appearance to
set the parameters listed in
Table 2-2 Display parameters
Parameter
Transparency
Display IP address This specifies whether to display the IP address of the local site on the
Display position
Display duration
Font color
Font size
Font Type
Issue 09 (2012-09-03)
Description
This specifies the number key functions on the remote control.
The default value is Control camera preset.
When the terminal is not in a conference, and the display is in full
screen mode, the number keys on the remote control do not
support two-stage dialing and can only be used to control camera
presets.
After the terminal joins a conference:
l Second Dial: When the display is in full screen mode, follow
the instructions and press the number keys to perform two-
stage dialing.
l Control camera preset: When the display is in full screen
mode, press a number key to move the camera to the preset
saved to that key.
NOTE
To toggle between these two options, press
Table 2-2.
Description
This specifies the transparency of the background photograph behind
the menu screen.
If this parameter is set to Opaque, no background photograph is
displayed behind the menu screen;
If this parameter is set to values other than Opaque, a background
photograph is displayed behind the menu screen with a degree of
transparency corresponding to the value chosen.
home screen.
This specifies the position of the site name displayed on the video.
This specifies the duration for which the site name will be displayed.
This specifies the color of the site name displayed on the video.
This specifies the font size of the site name.
This specifies the font type of the site name.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Network
on the remote control.
26