Huawei 9000 VCT V100R011 Administrator's Manual page 117

HUAWEI 9000 HD Video Terminal
Administrator Guide
Function Name
Mute/Unmute Speaker After you have muted the speaker of a site, the site cannot hear the
Voice activation
Request Chair
Request Floor
Release Chair
Discussion
Extend Conference
Add Site
Revoke Presentation
Revoke Chair
Set Continuous
Presence
End Conference
Enable Chair Control
Issue 09 (2012-09-03)
Description
current conference. To enable the site to hear the conference,
unmute the speaker.
This function is used during discussion. The site with the loudest
voice is viewed by the other sites in the conference.
An ordinary site can use this function to request chair control
rights.
This function is used to request the floor, especially when another
site is being broadcast.
The chair site can use this function to release chair control rights.
After the chair control rights are released, another site can request
to become the chair site.
You can use this function to cancel the following conference
control functions that are currently being used:
l Broadcasting sites
l Muting the microphone
l Muting the speaker
l Giving the floor
This function is used to extend a conference.
This function is used to add sites to an ongoing conference. The
sites join the current conference after being added.
At the chair site, you can select Add Site from the Conference
Control screen, and then select Address Book to add a site from
the address book or select Others to create a new site and add the
site to the conference.
This function is used by the chair site to revoke the presentation
sharing right from a site during a dual-stream conference when the
presentation mode is set to Presentation. The site whose
presentation sharing right has been revoked stops sharing the
presentation.
This function is available only to the site that initiates or pays for
the conference. After the chair control rights are revoked, no chair
site exists in the conference. Sites in the conference can request to
become the chair site afterward.
This function is used to view multiple site videos simultaneously.
This function is used to end a conference.
After the Enable Chair Control operation is performed on the
terminal whose built-in MCU is being used, the sites in the
conference can request chair control rights.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Conference Control
105