Customizing The Option Bar; Customizing The Conference Control Screen - Huawei 9000 VCT V100R011 Administrator's Manual

HUAWEI 9000 HD Video Terminal
Administrator Guide

6.1 Customizing the Option Bar

You can customize icons on the option bar to facilitate access to the corresponding screens.
Prerequisites
The terminal is in a conference.
Context
At the start of a conference, an option bar is displayed on your monitor.
The icons that you can customize on the option bar are Conference control, Presentation
source, and Layout.
l
l
Procedure
Step 1 Select
Step 2 Select the conference control options to be added to the option bar.
You can move the position of an option by selecting Up or Down.
Step 3 Select OK.
----End

6.2 Customizing the Conference Control Screen

You can customize the Conference control screen as required by specifying the conference
control options to be displayed on the screen.
Context
By default, the following options are displayed on the conference control screen: Request
floor, Broadcast Site, Continuous Presence, Discussion, Give Floor, Voice activation, Add
site, Enable chair control, Restore Auto Continuous Presence, and Lock conference.
Issue 09 (2012-09-03)
To hide the option bar
If no operation is performed for 15 seconds, the option bar is hidden automatically. To hide
the option bar immediately, press the left arrow key or
To display the option bar
In full screen mode, press
on the option bar to display the Customize Option Bar screen.
NOTE
If an administrator password has been set, you need to enter the password to display the Customize Option
Bar screen.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
.
6 Conference Control
.
109