Huawei 9000 VCT V100R011 Administrator's Manual page 68

HUAWEI 9000 HD Video Terminal
Administrator Guide
Parameter
Display H.239
automatically
Automatic layout
mode
Small window position This specifies the position of the small window displayed on the
In the following table, indicates the local video; indicates the local presentation; indicates
the remote video;
Table 3-12 Displayable contents of each video output interface (on the ViewPoint 9039,
ViewPoint 9036, View 9035, and ViewPoint 9033)
Video
Output
Interface
HD OUT 1
HD OUT 2
HD OUT 3
Issue 09 (2012-09-03)
Description
This specifies whether the presentation is output from the HD OUT
1 interface automatically.
Only the main output interface supports this function.
This specifies the display mode of the presentation.
l Full screen: The presentation or the video is displayed in full-
screen mode.
l PiP: The presentation and the video are displayed in picture-
in-picture mode.
l PoP: The presentation and the video are displayed in picture-
out-picture mode.
Only the main output interface supports this function.
main screen. The small window can be displayed in the lower right
corner, lower left corner, upper right corner, or upper left corner.
By default, the small window is displayed in the lower right corner.
Only the HD OUT 1 interface supports this function.
To switch the layout to the picture-in-picture mode, choose either
of the following methods:
l From the option bar, select Layout and then
l Press
is switched to the picture-in-picture mode.
indicates the remote presentation.
Video Combined
Displayed Picture
Yes
①②③④
No
①②③④
No
①②
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
on the remote control consecutively until the layout
Default Video
Before
Conference
①
②
①
3 Camera and Display
.
Default Video
In Conference
③
④
①
56