Locking A Conference; Restoring Automatic Continuous Presence - Huawei 9000 VCT V100R011 Administrator's Manual

HUAWEI 9000 HD Video Terminal
Administrator Guide
You can use the preceding conference control functions on the terminal whose built-in MCU is
being used only after selecting Disable Chair Control.

6.25 Locking a Conference

After a conference is locked, a site that is not in the conference cannot join the conference.
If the built-in MCU of a terminal is used during a conference, using the Lock conference
operation on the terminal whose built-in MCU is being used will prevent additional unwanted
sites from joining the conference.

6.26 Restoring Automatic Continuous Presence

After Restore Auto Continuous Presence is selected, the terminal automatically generates
continuous presence. The layout is determined by the continuous presence and adaptation
capabilities of the built-in MCU and the number of sites in the conference.
Automatic continuous presence has four modes: 4 panes, 6 panes, 8 panes, and 9 panes, as listed
in Table
Issue 09 (2012-09-03)
NOTE
A conference held using cascaded built-in MCUs does not support conference locking.
5-4.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Conference Control
116