Huawei 9000 VCT V100R011 Administrator's Manual page 48

HUAWEI 9000 HD Video Terminal
Administrator Guide
Parameter
Port settings
H.323 call port
RAS source port
RAS destination
port
Audio port
Video port
SIP call port
Local listen port
Server listen port
SIP TLS call port
Local SIP TLS
listen port
SIP server TLS
listen port
Issue 09 (2012-09-03)
Description
l Normal: All the port numbers cannot be changed.
l Port convergence: The port numbers used in H.323 converge, to
efficiently save port resources.
l Same port send/receive: The terminal sends and receives media
streams using the same port.
This specifies the communication port used by a remote site for
receiving and sending call signaling during communication between
local and remote sites. The default value is 1720.
This specifies the communication port used by the local site for
receiving and sending Registration, Admission and Status (RAS)
signaling during communication between local and remote sites. The
default value is 1719.
This specifies the communication port used by a remote site for
receiving and sending RAS signaling during communication between
local and remote sites. The default value is 1719.
This specifies the local communication port for receiving audio packets
during communication between local and remote sites. The default
value is 10002.
This specifies the communication port used by the local site for
receiving video packets during communication between local and
remote sites. The default value is 10004.
This specifies the communication port for sending SIP signals during
communication between local and remote sites. The default value is
5060.
This specifies the local SIP listen port of the terminal. The default value
is 5060.
This specifies the listen port of the SIP server with which the terminal
is registered. The default value is 5060.
When Transmission type is set to TLS, this parameter specifies the
communication port for sending SIP signals during communication
between local and remote sites. The default value is 5061.
NOTE
To set Transmission type, choose System Settings > Protocol > H.323/SIP
Settings.
When Transmission type is set to TLS, this parameter specifies the
local SIP listen port. The default value is 5061.
When Transmission type is set to TLS, this parameter specifies the
listen port of the SIP server with which the terminal is registered. The
default value is 5061.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Network
36