Huawei 9000 VCT V100R011 Administrator's Manual page 166

HUAWEI 9000 HD Video Terminal
Administrator Guide
Figure 11-1 Upgrading the software locally using a computer
Step 4 Click Browser, and find the VCT.dat file.
Step 5 Enter the IP address of the terminal, such as 10.10.10.10.
Step 6 Click Upgrade.
Step 7 From the displayed dialog box, enter the upgrade password and click OK.
----End
Follow-up Procedure
After upgrading, specify whether to restart the terminal as prompted.
Upgrading Multiple Terminals at a Time
You can upgrade multiple terminals at one time using the upgrade program installed on the
computer.
Procedure
Step 1 Power on the computer and the terminal.
Step 2 Extract the compressed file of the upgrade software on the computer.
Step 3 Run UpgradeTool.exe to display the window as shown in
Step 4 Click Browser, and then find the file in .dat format.
Step 5 Click
Issue 09 (2012-09-03)
NOTE
To independently upgrade the Huawei telepresence software running on the touch panel, select the
HID.dat file.
NOTE
If Reboot is selected during the upgrade, the terminal will automatically restart after the upgrade. It is
recommended that you do not select Reboot when upgrading the touch panel's software independently;
otherwise, the terminal will restart and disconnect from the touch panel after the upgrade.
to display the window as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 Maintenance and Troubleshooting
Figure 11-1.
Figure 11-2.
154