Huawei 9000 VCT V100R011 Administrator's Manual page 60

HUAWEI 9000 HD Video Terminal
Administrator Guide
Parameter
Input source
Mirroring
1080p PsF
conversion
Stretch mode
Table 3-6 Common settings parameters
Parameter
Remote control
Serial port type
Issue 09 (2012-09-03)
Description
This specifies the input source format.
NOTE
The ViewPoint 9039, ViewPoint 9036, ViewPoint 9035, ViewPoint 9033,
ViewPoint 9030, and HUAWEI VP9035A support video input with a resolution
of up to 1080p 30 Hz.
This specifies whether the terminal displays a reflection of an input
video, wherein the right and left sides of the original are reversed. By
default, Normal is selected. If the terminal is used in a Huawei
telepresence system, select Horizontal mirroring.
l Normal: The input video will not be reversed.
l Horizontal mirroring: The terminal displays a reflection of the
input video, wherein the right and left sides of the original are
reversed like the reflection of something seen in a mirror.
When the camera connected to the terminal uses the Progressive
segmented Frame (PsF) mode for transmitting signals, enable this
function.
The terminal adjusts the input video based on the encoding format of
the video.
l Stretch: Stretch the video to the full-screen mode without locking
the aspect ratio of the video.
l No stretch: Stretch the video to the full-screen mode after locking
the aspect ratio of the video. Black borders may appear at the four
sides of the video display.
l Intelligent stretch: The system cuts the video to a proper size, and
then stretches the video to the full-screen mode after locking the
aspect ratio. For example, to change a wide-screen video to a narrow-
screen video, the system cuts the left and right sections of the wide-
screen video, and then stretches the video to the full-screen mode.
Description
This specifies whether a remote site can control the local camera during
a call. By default, Allow is selected.
This specifies the type of the serial port of the camera that is connected
to the terminal. You can select between RS232 and RS422.
The COM1 and COM2 serial ports on the rear panel of the terminal are
dual-mode ports that can be used as both RS232 and RS422 interfaces.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Camera and Display
48