Setting Sip Parameters - Huawei 9000 VCT V100R011 Administrator's Manual

HUAWEI 9000 HD Video Terminal
Administrator Guide
Step 2 Save the settings.
----End

2.5.4 Setting SIP Parameters

When the Session Initiation Protocol (SIP) is used for video communications, the SIP parameters
of the terminal, such as whether to register with the SIP server, must be set.
Prerequisites
Both parties of the conference support SIP.
Procedure
Step 1 Choose Settings > Network > IP > SIP, and then set the parameters listed in
Table 2-6 SIP parameters
Parameter
Register with server This specifies whether the terminal registers with the SIP server.
Server address
Enable proxy
server
Proxy server
address
Conference service
number
Site number
Issue 09 (2012-09-03)
Description
l Enable: After the terminal is registered with the SIP server
successfully, it can call a remote site using the site number, site
name, or IP address.
l The terminal does not register with the SIP server, and it can call
another site using only the IP address.
This specifies the IP address of the SIP server.
When the terminal needs to register with the IP multimedia subsystem
(IMS) for deploying services, enable the proxy server and set its
address.
NOTE
Borne by the standard IP protocol, the IMS uses voice over IP (VoIP)
applications based on the standard SIP applications of the 3rd Generation
Partnership Project (3GPP) to provide fixed and mobile multimedia services
for operators. Integrating MCUs can enhance the functionality of the Huawei
IMS HD videoconferencing solution.
The proxy server needs to forward the registration request from the
terminal to the SIP server in the IMS network when the terminal is
registering with the IMS network.
Before initiating a conference from the terminal on an IMS network,
you need to set this parameter and ensure that the terminal setting is
consistent with the setting on the IMS network device. The conference
service number can be obtained from the administrator of the IMS
network device.
This specifies the site number of the local terminal. When the local
terminal is registered with the SIP server, another terminal can call
the local terminal using this site number. The site number can contain
only digits.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Network
Table 2-6.
31