Huawei 9000 VCT V100R011 Administrator's Manual page 91

HUAWEI 9000 HD Video Terminal
Administrator Guide
Table 5-4 Automatic continuous presence modes
Number of Present
Sites
1–4
(1+3 mode)
5
(1+4 mode)
5–6
(1+5 mode)
7–8
(1+7 mode)
9
In automatic continuous presence mode, the continuous presence mode can be changed by
increasing or decreasing the number of involved panes according to actual requirements. For
Issue 09 (2012-09-03)
NOTE
l In the preceding table, – represent the site positions on the screen.
main picture.
l If a conference is held using a built-in MCU, the continuous presence modes which can be set manually
are 4 panes, 6 panes, 8 panes, and 9 panes, the same as the four automatic continuous presence modes
described in Table 5-4. Note that if you set the continuous presence mode to 4 panes, the layout can
be 1+3, or balanced display of four pictures on the screen, as shown in the following table.
Continuous Presence Layout
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
or
5 Initiating a Conference
represents the position of the
or
79