Upgrading Software Using The Minimum System - Huawei 9000 VCT V100R011 Administrator's Manual

HUAWEI 9000 HD Video Terminal
Administrator Guide
Step 11 From the displayed dialog box, enter the upgrade password and click OK.
----End
Follow-up Procedure
After upgrading, specify whether to restart the terminal as prompted.

11.2.2 Upgrading Software Using the Minimum System

If upgrading the software locally failed, the software should be upgraded using the minimum
system.
Context
Before upgrading, note the following prerequisites:
l
l
l Replace the current software during the upgrade if the versions of the current and destination
l Turn the switch on the rear panel of the terminal to Load, and then restart the terminal. The
Procedure
Step 1 Change the IP address of the computer to a static IP address, such as 172.16.21.115, and then
set the subnet mask to 255.255.252.0.
Step 2 Turn the switch on the rear panel of the terminal to Load.
Step 3 Restart the computer and the terminal.
Step 4 Extract the compressed file of the upgrade software on the computer.
Step 5 Run UpgradeTool.exe to display the upgrade window.
Step 6 Select all the items, click Browser, and then find the file in .dat format.
Step 7 Enter the IP address of the terminal, that is, 172.16.21.114. Then click Upgrade.
Step 8 From the displayed dialog box, enter the upgrade password and click OK.
Step 9 After the upgrade, turn the switch on the rear panel of the terminal to Norm.
Step 10 Restart the terminal.
----End
Issue 09 (2012-09-03)
A copy of the destination version of software is available on the computer.
The computer is connected to the terminal using a crossover network cable or a switch.
CAUTION
software are the same.
IP address of the terminal is changed to 172.16.21.114. Ensure that the IP addresses of the
computer and the terminal are in the same network segment.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 Maintenance and Troubleshooting
157