Huawei 9000 VCT V100R011 Administrator's Manual page 42

Hd video terminal
Table of Contents

Advertisement

HUAWEI 9000 HD Video Terminal
Administrator Guide
Procedure
Step 1 Choose Settings > Network > IP > H.323, and then set the parameters listed in
Table 2-5 H.323 parameters
Parameter
Enable GK
GK address
E.164
H.323 ID
Authentication ID
Password
Huawei GK
Use VoIP gateway
VoIP gateway
address
Issue 09 (2012-09-03)
NOTE
The GK is the network isolator of the videoconferencing system and is used to manage the network
bandwidth, terminal authentication, and address translation. It enables calls to be made to fixed site names
rather than changeable IP addresses.
Description
This specifies whether the terminal registers with the GK.
l If this parameter is enabled, the terminal registers with the GK
l If this parameter is disabled, the terminal does not register with
This specifies the IP address of the server where the GK is installed.
This specifies the site number of the local terminal. When the local
terminal is registered with the GK, another terminal can call the local
terminal using this site number. The site number can contain only
digits.
The H.323 ID is used by the GK to identify the local terminal after
the terminal is registered with the GK.
The name can consist of digits and letters.
This specifies the user name used for H.323 authentication.
The name can consist of digits and letters.
This is the password used by the terminal to register with the GK. The
GK authenticates the validity of the terminal by checking this
password.
NOTE
Select this option when Huawei GK is used.
If this option is not selected, some functions on the terminal are
unavailable, such as Conference Control.
If this check box is selected, you must set VoIP gateway address.
The address is used to call the public switched telephone network
(PSTN) terminal connected to the voice gateway.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
after startup. After the terminal registers with the GK successfully,
it can call a remote site using the site number, site name (defined
in the address book), or IP address. For a conference attended by
IP sites, the GK must be used.
the GK, and it can call a remote site using only the IP address.
During GK authentication, the password set on the terminal should be
consistent with the password preset on the GK.
2 Network
Table
2-5.
30

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents