Huawei 9000 VCT V100R011 Administrator's Manual page 76

HUAWEI 9000 HD Video Terminal
Administrator Guide
Indicator Status
The indicators are all in blue and
blink in turn clockwise.
The indicators are all in blue and
blink 10 times per second
simultaneously.
The indicators are all in blue and
blink 4 times per second
simultaneously.
The indicators are all in red and
blink simultaneously.
The indicators are all in blue and
blink for 5 seconds simultaneously.
Table 4-3 Description of the status indicators at the bottom of the VPM210
Indicator Status
The right indicator at the bottom is
on.
The left indicator at the bottom is on. 2
The left and right indicators at the
bottom are both on.
Cascading VPM210s
Each VPM210 supports 360-degree audio pickup within a radius of six meters. In a large
conference room (of about 40 to 50 square meters) with only one VPM210, audio far from the
VPM210 cannot be well picked up; cascading VPM210s can help to solve this problem.
Dynamically cascading, connecting, or disconnecting VPM210s does not interrupt conferences.
Figure 4-1
Figure 4-1 Cascading of VPM210s
Issue 09 (2012-09-03)
shows the cascading of VPM210s.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Status of the VPM210
l The VPM210 starts properly and is obtaining an IP
address.
l The VPM210 is reconnected to the terminal.
The minimum system is being started.
The VPM210 is upgrading.
A hardware alarm exists.
The telnet connection is being set up.
MIC ID
1
3
4 Microphone and Speaker
64