Set Time Manually; Office Time; Figure 54: Set Time Manually - Grandstream Networks UCM6202 User Manual

Set Time Manually

To manually set the time on the UCM6200, go to Web UI->Settings->Time Settings->Set Time Manually.
The format is YYYY-MM-DD HH:MI:SS.
--------------------------------------------------------------------------------------------------------------------- -----------------------
Note:
Manually setup time will take effect immediately after saving and applying change in the web UI. If users
would like to reboot the UCM6200 and keep the manually setup time setting, please make sure "Remote
NTP Server", "Enable DHCP Option 2" and "Enable DHCP Option 42" options under Web GUI->Settings-
>Time Settings->Time Auto Updating page are unchecked or set to empty. Otherwise, time auto updating
settings in this page will take effect after reboot.
--------------------------------------------------------------------------------------------- -----------------------------------------------

Office Time

On the UCM6200, the system administrator can define "office time", which can be used to configure time
condition for extension call forwarding schedule and inbound rule schedule. To configure office time, go to
Web UI->Settings->Time Settings->Office Time. Click on "Create New Office Time" to create an office
time.
M4.1.0,M11.1.0
The 1st number indicates Month: 1,2,3.., 12 (for Jan, Feb, .., Dec).
The 2nd number indicates the nth iteration of the weekday: (1st Sunday,
3rd Tuesday...). Normally 1, 2, 3, 4 are used. If 5 is used, it means the last
iteration of the weekday.
The 3rd number indicates weekday: 0,1,2,..,6 ( for Sun, Mon, Tues, ...
,Sat).
Therefore, this example is the DST which starts from the First Sunday of
April to the 1st Sunday of November.

Figure 54: Set Time Manually

UMC6200 Series User Manual
P a g e | 76