SET TIME MANUALLY
To manually set the time on the UCM6510, go to Web GUI->Settings->Time Settings->Set Time
Manually. The format is YYYY-MM-DD HH:MI:SS.
Figure 26: Set Time Manually
Note:
Manually setup time will take effect immediately after saving and applying change in the web UI. If users
would like to reboot the UCM6510 and keep the manually setup time setting, please make sure "Remote
NTP Server", "Enable DHCP Option 2" and "Enable DHCP Option 42" options under Web GUI->Settings-
>Time Settings->Time Auto Updating page are unchecked or set to empty. Otherwise, time auto
updating settings in this page will take effect after reboot.
Firmware Version 1.0.0.25
UCM6510 IP PBX User Manual
Page 57 of 233