To manually set the time on the UCM6100, go to Web GUI->Settings->Time Settings->Set Time
Manually. The format is YYYY-MM-DD HH:MI:SS.
Figure 19: Set Time Manually
NTP SERVER
The UCM6100 can be used as a NTP server for the NTP clients to synchronize their time with. To configure
the UCM6100 as the NTP server, set "Enable NTP server" to "Yes" under web GUI->Settings->Time
Settings->NTP Server. On the client side, point the NTP server address to the UCM6100 IP address or
host name to use the UCM6100 as the NTP server.
Firmware Version 1.0.5.19
UCM6100 Series IP PBX User Manual
Page 50 of 183