Syslog; Figure 114: Reset And Reboot - Grandstream Networks UCM6510 IP PBX User Manual

Figure 114: Reset and Reboot

SYSLOG

On the UCM6510, users could dump the syslog information to a remote server under web GUI-
>Maintenance->Syslog. Enter the syslog server hostname or IP address and select the module/level for
the syslog information.
The default syslog level for all modules is "error", which is recommended in your UCM6510 settings
because it can be helpful to locate the issues when errors happen.
Some typical modules for UCM6510 functions are as follows and users can turn on "notic" and "verb"
levels besides "error" level.
pbx: This module is related to general PBX functions.
chan_sip: This module is related to SIP calls.
chan_dahdi: This module is related to analog calls (FXO/FXS).
app_meetme: This module is related to Conference Bridge.
Note:
Syslog is usually for debugging and troubleshooting purpose. Turning on all levels for all syslog modules
is not recommended for daily usage. Too many syslog print might cause traffic and affect system
performance.
Firmware Version 1.0.0.25 UCM6510 IP PBX User Manual Page 223 of 229
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299