http://arttel.ru
VR Clean Threshold
VR Clean Time
Clean Interval
All the cleaner logs will be listed on the bottom of the page.
RESET AND REBOOT
Users could perform reset and reboot under Web GUI->Maintenance->Reset and Reboot.
To factory reset the device, select the mode type first. There are two different types for reset.
User Data: All the data including voicemail, recordings, IVR Prompt, Music on Hold, CDR and backup
x
files will be cleared.
All: All the configurations and data will be reset to factory default.
x
SYSLOG
On the UCM6100, users could dump the syslog information to a remote server under Web
GUI->Maintenance->Syslog. Enter the syslog server hostname or IP address and select the module/level
for the syslog information.
The default syslog level for all modules is "error", which is recommended in your UCM6100 settings
because it can be helpful to locate the issues when errors happen.
Firmware Version 1.0.2.21
http://arttel.ru/shop/ip-atc/ip-ats-grandstream-ucm6102
Specify the Voice Records threshold from 0 to 99 by using local storage
status in percentage.
Enter 0-23 to specify the hour of the day to clean up Voice Records.
Enter 1-30 to specify the day of the month to clean up Voice Records.
Figure 83: Reset and Reboot
UCM6100 Series IP PBX User Manual
Page 156 of 159