Configure Ucm Remoteconnect Service For Ip Phones; Figure 4: Gxv3370 Account Configuration Page - Grandstream Networks UCM63 Series Configuration Manual

CONFIGURE UCM REMOTECONNECT SERVICE FOR IP PHONES

IP phone end devices behind NAT in external network can register to the UCM6300 series for remote
work purpose.
Please refer to below configuration example on GXV3370.
1. Log in GXV3370 web UI as admin, navigate to AccountBasic Settings page and configure
the following:
SIP Server: Enter the UCM Public Address: Public TLS Port. This information can be found
under UCM web UI Value-added FeaturesUCM RemoteConnectPlan page.
NAT Travesal: STUN
2. Go to AccountSIP Settings and configure SIP transport to "TLS".

Figure 4: GXV3370 Account Configuration Page

UCM630x series
Remote Connect EndPoint Configuration Guide
P a g e | 7