Call Park; Park A Call; Retrieve The Parked Call - Grandstream Networks UCM6510 IP PBX User Manual

CALL PARK

The UCM6510 provides call park and call pickup features via feature code.

PARK A CALL

There are two feature codes that can be used to park the call.

Feature Maps->Call Park (Default code #72)
During an active call, press #72 and the call will be parked. Parking lot number (default range 701 to
720) will be announced after parking the call.

Feature Misc->Call Park (Default code 700)
During an active call, initiate blind transfer (default code #1) and then dial 700 to park the call. Parking
lot number (default range 701 to 720) will be announced after parking the call.

RETRIEVE THE PARKED CALL

To retrieve the parked call, simply dial the parking lot number and the call will be established. If a parked
call is not retrieved after the timeout, the original extension who parks the call will be called back.
Firmware Version 1.0.0.25
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
UCM6510 IP PBX User Manual Page 173 of 229