Call Park - Grandstream Networks UCM6108 User Manual

http://arttel.ru

Call Park

Audio Mix Record
DND/Call Forward
Do Not Disturb (DND) Activate
Do Not Disturb (DND) Deactivate
Call Forward Busy Activate
Call Forward Busy Deactivate
Call Forward No Answer Activate
Call Forward No Answer
Deactivate
Call Forward Unconditional
Activate
Call Forward Unconditional
Deactivate
Feature Misc
Feature Code Digits Timeout
Firmware Version 1.0.2.21
http://arttel.ru/shop/ip-atc/ip-ats-grandstream-ucm6102
callee.
Default code: #72.
x
Enter the code during active call to park the call.
x
Options
x
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both: Enable the feature code on both caller and
callee.
Default code: *3.
x
Enter the code followed by # or SEND to start recording the
x
audio call and the UCM6100 will mix the streams natively on
the fly as the call is in progress.
Options
x
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both: Enable the feature code on both caller and
callee.
Default code: *77.
x
Default code: *78.
x
Default Code: *90.
x
Enter the code and follow the voice prompt. Or enter the code
x
followed by the extension to forward the call.
Default Code: *91.
x
Default Code: *92.
x
Enter the code and follow the voice prompt. Or enter the code
x
followed by the extension to forward the call.
Default Code: *93.
x
Default Code: *72.
x
Enter the code and follow the voice prompt. Or enter the code
x
followed by the extension to forward the call.
Default Code: *73.
x
Default Setting: 1000.
x
UCM6100 Series IP PBX User Manual Page 118 of 159