Deleting A Transients Search; Deleting A Transient - AEMC PowerPad III 8336 User Manual

Item Function
1
Location in the record of the zone displayed.
2 Instantaneous value of the signals according to the position of the cursor on the scale. To move the cursor use the ◄ and ► buttons.
3
Move cursor to one period of the signal before transient triggering time.
4
Move cursor to transient triggering time.
5
Number assigned to displayed graph (e.g. 1 is highlighted indicating channel V1 triggered capture of the transient)
: Zoom In - Press this button to zoom in.
6
NOTE: The selection filter is dynamic and depends on the connection chosen. For example, the selection filter lists
(3U, 3A) for a 3-wire 3-phase set-up.
To return to the Transient List screen, press

5.1.1.3 DELETING A TRANSIENTS SEARCH

You can remove a stored search for transients from memory.
To do this, when the Detection List screen is displayed (see Figure 5-3), select the search to be deleted. Then press the
button, and press
progress. To return to the Waveform capture screen, press

5.1.1.4 DELETING A TRANSIENT

When the Transient List screen is displayed (see Figure 5-3), select the transient to be deleted. The selected transient is
bolded. Next, press the
press .
44
to confirm the deletion. Note that you can delete a transient search only if it is not actively in
button, and then press
: Zoom Out - Press this button to zoom out.
.
.
to confirm the deletion. To return to the Waveform capture screen,
Power Quality Analyzer PowerPad III Model 8336
®