Table of Contents
Advertisement
The Configuration
button displays the Configuration menu for configuring the instrument. This must be done before each new
type of measurement. The configuration remains in memory, even after the instrument is turned OFF.
4.1. CONFIGURATION MENU
The arrow (, , , ) buttons let you navigate the Configuration menu and select settings. A value that can be modified is identified
by arrows.
For most options, you must press the button to confirm and apply the change. Pressing the return
menu from a sub-menu.
4.2. DISPLAY LANGUAGE
To select the display language, press the yellow button under the corresponding icon on the screen (Figure 4-1).
The selected language is highlighted in yellow.
4.3. DATE/TIME
The
Date/Time menu sets the instrument date and time.
1.
In the Configuration screen, select the Date/Time option and press . This displays the Date/Time menu.
2.
To change a value, press or . To move from one field to another, press or . To confirm, press .
3.
Use these buttons to select and set the date format (DD/MM/YY or MM/DD/YY) and time format (12/24 or AM/PM). Changes
take effect immediately.
4.
To return to the Configuration menu, press
NOTE: The date and time parameters cannot be changed while the instrument is recording, metering energy, or searching
for transients, alarms, and/or inrush current events.
4.
CONFIGURATION
Figure 4-1
Figure 4-2
.
23
button returns to the main
Advertisement
Table of Contents
