Table of Contents
Advertisement
Probes and Ratios
Capture Mode
Trend Mode
Alarm Mode
Erase Memory
About
3.2.1 DATE/TIME
The
parameter defines the system date and time. The display is as follows:
The Date/Time field is highlighted in yellow.
■ To change the date/time, press the
■ To change a value or move from one field to another, press the ▲ or ▼ button.
■ Press the
button to confirm configuration.
NOTE: 12/24: Display of time in 24-hour format. AM/PM: Display of time in 12-hour format. The time is followed by AM or PM.
To return to the Configuration menu, press the
16
Find Quality Products Online at:
Defines the type of current probe to connect (see § 3.2.5)
• MN93: 200A
• MN193: 100A or 5A (with variable ratio)
• SR193: 1000A
• SL261: 10A and 100A range
• AmpFlex
Sensors: 3000A (measures up to 6500Arms)
®
• MiniFlex
Sensors: 1000A
®
• MR193: 1000AAC/1200ADC
• 5A three-phase adapter (3-channel only)
Configures the voltage and current thresholds (see § 3.2.66)
Selects the parameters to record (see § 3.2.77)
(Up to four configurations)
Defines the parameters of an alarm (see § 3.2.88)
Deletes configurations, alarm settings, snapshots, and recordings (see § 3.2.9)
Displays the serial number, software and hardware version
button.
GlobalTestSupply
www.
Figure 3-2
button.
.com
Power Quality Analyzer PowerPad
sales@GlobalTestSupply.com
®
III Model 8435
Advertisement
Table of Contents
