Date/Time - AEMC PowerPad III 8336 User Manual

Probes and Ratios Defines the type of current probe to connect (see § 4.1.5)
• MN93: 200A
• MN193: 100A or 5A (with variable ratio)
• SR193: 1000A
• SL261: 10A and 100A range
• AmpFlex
• MiniFlex
• MR193: 1000A
• J93: 3500A
• 5A 3-phase adapter (3-channel only)
Capture Mode
Configures the voltage and current thresholds (see § 4.1.6)
Trend Mode
Selects the parameters to record (see § 4.1.7)
(Up to four configurations)
Alarm Mode
Defines the parameters of an alarm (see § 4.1.8)
Erase Memory Deletes configurations, alarm settings, snapshots, and recordings (see § 4.1.9)
About
Displays the serial number, software and hardware version (see § 4.1.10)

4.1.1 DATE/TIME

The Date/Time menu
With the Date/Time field highlighted in yellow, press
another, press ◄ or ►. To confirm, press
Proceed in the same way for selecting data format (DD/MM/YY or MM/DD/YY) and time format (12/24 or AM/PM).
Changes take effect immediately in the data display. To return to the Configuration menu, press
NOTE: The date and time parameters cannot be configured while the instrument is recording, metering energy, or
searching for transients, alarms, and/or inrush current acquisition.
Power Quality Analyzer PowerPad
Sensors: 3000A (measures up to 10kA)
®
Sensors: 3000A
®
/1200A
AC DC
/5000A
AC DC
defines the system date and time. The display is as follows:
.
III Model 8336
®
Figure 4-2
. To change a value, press ▲ or ▼. To move from one field to
.
19