Inrush Current Mode - AEMC 8335 User Manual

6.1.2 Inrush Current Mode

This mode enables the waveform of the current to be recorded, captured, and
deleted. The PowerPad
memory.
NOTE: When Inrush Current mode is selected the display screen will depend on
the following conditions:
if ...
no capture has been made
captures have been made
6.1.2.1 Programming the Capture of a Waveform
To program the capture of the current's waveform, proceed as follows:
1. Select the sub-menu by pressing the
Schedule screen is displayed.
Item Function
1 Reminder of the mode used
2 Display of sub-mode used
3 Current date and time
4 Battery charge level
5 Displays the parameters of the capture
6 Programs the capture
OK: confirms programming of a capture
7
: deletes a capture (this icon is displayed if a capture has been made)
Power Quality Analyzer Model 8335
keeps only a single current waveform capture in
®
then ...
the Capture Schedule screen is displayed
the Capture Parameters screen is displayed
1 2
icon's yellow button. The Capture
3
Figure 6-5
4
5
6
7
55