Alarm Conditions Configuration - AEMC 8335 User Manual

7.6.3 Alarm Conditions Configuration

The Alarm Conditions tab allows you to set up 40 alarm configurations.
• Schedule Alarm Search:
starting and ending time and date to assign the time period during which the
alarms will be active.
• Prev Page & Next Page:
per page.
• Capture Parameter:
selected parameter.
Choices include:
None: no alarm
Vrms: voltage root mean squared
Urms: voltage phase minus phase root
mean squared
Arms: current root mean squared
VPST: voltage short term flicker
Vcf: voltage crest factor
Ucf: voltage phase minus phase
crest factor
Acf: current crest factor
78
Figure 7-9
Check this box to activate the alarms, and set a
Move between the 4 pages of alarms with 10 alarms
The Alarm will be triggered based on the value of the
Vunb: v oltage unbalance
Aunb: current unbalance
Hz:
Akf: current K factor
Vthd: voltage total harmonic distortion
Uthd: voltage phase minus phase total
Athd: current total harmonic distortion
W:
frequency
harmonic distortion
active power
Power Quality Analyzer Model 8335