Editing New Organ Program Names - Siemens AXIOM Iconos R200 Operator's Manual

POLYDOROS SX 65/80
Integrated Control Console
Iconos DFR
Program
Edit name
Store
34
/ 36

Editing new organ program names

◆ Actuate the desired system selection button
◆ Actuate the program button in the data menu
– The program menu appears
Iconos DRF Iconos Iconos Bed
Cassette
Esophagus Colon Cerv spine
2 F/s 1 F/s oblique
Abdomen Myelo
1 F/s 1 F/s
Trachea
1 F/S
DSA Carotis NAT Series
2 F/s 2 F/s
7,5 F/s
◆ Actuate the Edit Name button
– The button appears inverted
– The program menu for the programming mode appears
Iconos DRF Iconos DRF Iconos Iconos Bed
Cassette
Edit organ name and
press button Store to save changes
Esophagus Colon Cerv spine
2 F/s 1 F/s oblique
Abdomen Myelo
1 F/s 1 F/s
Trachea
1 F/S
NAT Series
DSA Carotis
2 F/s 2 F/s
7,5 F/s
◆ Select a blank field for a new organ program
– The field appears inverted
◆ Type the name of the organ as it is to appear on the button
– Allowed is a maximum of two lines of 10 characters each
◆ Actuate the Store button
AXD3-340.620.13.01.02
Vertix
Store
Edit name
Cerv spine
Data
oblique
Vertix
Store
Edit name Edit name
Data
Operator Manual